みんなが読みやすいように、Google広告を外しました!

QIDI Q3D announced: dual-nozzle printing and pre-orders open

QIDI Q3D printer and official logo. Dual nozzle. Just announced. Pre-orders open!
  • Link copied!

Read in other languages

QIDI has announced the Q3D dual-nozzle 3D printer at Formnext 2026, with pre-orders open through its official store. It puts two hotends in one lightweight toolhead, with a primary hotend rated up to 350°C and chamber heating up to 70°C.

QIDI Q3D with a filament supply unit on top and a supported print inside the chamber.
QIDI Q3D product image. Image supplied by QIDI.

Photos from the booth

QIDI staff sent me these photos from the Formnext booth.

Front view of the QIDI Q3D on display at Formnext, with printed models beside it.
QIDI Q3D on display at Formnext. Photo taken and supplied by QIDI.
Angled view of the QIDI Q3D with its top open and two filament spools mounted on the right.
The top is open, with filament spools mounted on the right. Photo taken and supplied by QIDI.
Top view of the QIDI Q3D toolhead, showing two feed tubes, the cable chain and the X-axis linear rail.
Two feed tubes enter the toolhead above the X-axis linear rail. Photo taken and supplied by QIDI.

Two nozzles, separate material paths

Each nozzle has its own temperature setting, allowing different materials to be used in the same print, including a separate support material. QIDI says the separate extruder modules and filament paths reduce the purging and temperature adjustments needed when switching materials, saving time and filament.

The primary hotend reaches up to 350°C and uses a quick-release design for replacement.

QIDI diagrams of the dual-nozzle toolhead, eddy current sensor, linear rail and drive belt.
Dual-nozzle toolhead and motion hardware. Image supplied by QIDI.

Leveling and motion

The Q3D uses an eddy current sensor for bed leveling. According to QIDI, the system measures the build plate directly with the nozzle, removing the need for offset compensation.

Linear guide rails reduce friction and wear, while the lightweight toolhead is intended to limit vibration during fast moves and reduce ringing and ghosting on printed surfaces.

A heated chamber, with cooling where needed

QIDI’s fourth-generation active chamber heating reaches up to 70°C. It is designed to keep cooling more even when printing materials such as nylon, reducing warping and cracks between layers.

A dedicated active cooling system directs cool air onto the extruder to reduce heat-related clogs. A separate dual-intake system draws outside air in to cool freshly extruded material, with QIDI claiming improvements to overhangs and bridges.

QIDI diagrams showing extruder cooling, chamber heating up to 70°C and dual-intake part cooling.
Chamber heating, extruder cooling and external-air part cooling. Image supplied by QIDI.

The air circulation system also includes a G3 pre-filter, an H12 HEPA filter and activated carbon to capture particles and reduce odors.

Pricing and pre-orders

ModelPrice
Q3DUS$599
Q3D Combo (with QIDI BOX2)US$749

The pre-order deposit is US$30 and is credited as US$100 toward the purchase.

QIDI Q3D and QIDI BOX2
Official QIDI StoreQIDI Q3D / Q3D ComboDual-nozzle 3D printer. Combo includes QIDI BOX2.

Discover more from Psych0h3ad

Subscribe to get the latest posts sent to your email.

QIDI Q3D printer and official logo. Dual nozzle. Just announced. Pre-orders open!

If you like this article, please
Follow !

Share this article
  • Link copied!
  • Link copied!

Comments

To comment