This article contains affiliate links.
BIQU announced four new product lines for Formnext 2026: the BIQU VAULT filament management system, the Infinity Bed automatic part-removal system, BQDry Duo/Solo filament dryers, and the CryoGrip Omni build plate.
Formnext 2026 takes place at Messe Frankfurt, Germany, on November 17–20. BIQU is exhibiting in Hall 12.1, Stand E31.
BIQU’s Formnext 2026 announcement
Booth displays and the official livestream

BIQU has published a booth tour and new-product demonstration on its official YouTube channel. The stream shows operations and mechanisms on the display units, including spool registration on VAULT and container removal on BQDry.
- 28:20 onward — Infinity Bed: Installation on a P2S and an explanation of the belt bed.
- 38:50 onward — CryoGrip Omni: A look at the plate and its supported materials.
- 47:35 onward — BIQU VAULT: Weighing and registering spools, then locating them in the rack.
- 1:07:31 onward — BQDry Solo/Duo: Removing the container and explaining the container and heating-base structure.
BIQU VAULT: Filament storage and inventory management

BIQU VAULT combines a storage rack with the BIQU HUB APP to manage filament inventory and storage locations. The rack has individual spool slots with indicator lights, a built-in scale and a touchscreen.

46 slots in the main rack, plus 50 per expansion rack
The main rack has 46 slots: 40 at 80 mm wide and six at 105 mm wide. The six wider slots in the second row can hold BQDry Solo containers as well as standard spools.


Each expansion rack has 50 slots, and up to three can connect to one main rack. An expansion rack requires a main rack. The included 24 V, 1 A adapter can power the main rack and up to two expansion racks; a third expansion requires a higher-output adapter or a separate power supply.
| Configuration | Capacity | Power supply |
|---|---|---|
| Main rack only | 46 slots | Included 24 V, 1 A adapter |
| Main rack + one expansion | 96 slots | Included 24 V, 1 A adapter |
| Main rack + two expansions | 146 slots | Included 24 V, 1 A adapter |
| Main rack + three expansions | 196 slots | Higher-output adapter or separate power supply required |
Both the main and expansion racks measure 1,061 × 280 × 1,420 mm (W × D × H). Load limits are 1.5 kg per slot and 70 kg per rack. Assembly is required. The main rack includes four leveling casters, screws and tools, assembly instructions, a power adapter, 50 RFID tags and wall-fixing brackets.
Read the tag, weigh the spool, then log its location

Registration uses the built-in scale and tag reader. The scale has a 2 kg capacity and displays weight in 1 g increments. It records the available brand, material and color information from compatible tags, along with the net filament weight.
- Prepare a spool with a compatible tag.
- Place it on the built-in scale to register the tag information and net filament weight.
- Place it in the slot with the green indicator light. That position is saved as its storage location.
BIQU says it can identify factory-tagged filament from Bambu Lab, Creality and ELEGOO without rewriting the tags. It also supports OpenTag3D. For filament without a compatible tag, use an included blank tag and select details from a database covering more than 20 brands and thousands of presets, or enter them manually.
Select filament in the app to light up its slot

To retrieve filament, select it in the app or on the rack’s touchscreen to light up its storage slot. A photo-based search can also find close color matches within the inventory.
There are six inventory views: cards, a list, brand × material × color, material × color, material, and color. Users can check individual spools or see remaining stock grouped by material or color. Custom filament entries have no stated limit.
The app also displays filament use and estimated material costs. Cost tracking requires a unit price for each filament, with the totals intended as a guide for purchasing and inventory planning.
Infinity Bed: Automatic part removal between prints

The BIQU × FOXLT Infinity Bed replaces the stock bed in Bambu Lab P1P/P1S/P2S printers. It is designed to remove finished parts automatically and move on to the next queued print.

A replacement bed with a textured PEI belt


The front has a gold-colored textured PEI belt. The P1 version has a P1 filament wiper at the top and controls on the right. The belt drive is housed in the black frame.
After printing, the belt moves the finished part toward the collection area, while an integrated scraper helps release it. This scraper is separate from the silver filament wiper at the top of the front view.

From part removal to the next print
- When a print finishes, the belt advances to move the finished part toward the collection area.
- The belt and integrated scraper release the part, clearing the bed for the next job.
- The next queued print starts automatically.
BIQU says installation requires no changes to the existing firmware. The design is intended to retain the printer’s native functions, including nozzle wiping, build-plate detection and camera-based detection.
P1 and P2 versions: Dimensions, specifications and included parts

The P1 and P2 versions differ in thickness and recommended print height. BIQU lists a maximum bed temperature of 110°C and a 110–240 V AC input for both. The table separates the manufacturer’s recommended print size from the unit’s overall dimensions.
| Item | P1 version | P2 version |
|---|---|---|
| Overall dimensions (W × D × thickness) | 276 × 304 × 33 mm | 276 × 304 × 34 mm |
| Recommended print size | 254 × 235 × 235 mm | 254 × 235 × 250 mm |
| Included screws | One M3 × 5 screw | Two M3 × 5 screws |
| Included hex keys | One each: 1.5, 2.0 and 2.5 mm | One each: 1.5, 2.0 and 2.5 mm |
The P1 version also includes one P1 filament wiper. BIQU’s P1-specific description says an onboard NTC sensor provides real-time chamber temperature readings.
Control runs over LAN from devices on the same local network. BIQU says print data can be handled without sending it to an external cloud. The official app is listed as coming soon, with remote fleet management planned for a future update.
BQDry Duo/Solo: Two-spool and single-spool filament dryers

BQDry comes in the single-spool Solo and two-spool Duo versions. The clear storage container separates from the heating base, so it can be lifted off after drying and used for storage.

Air passages open when the container is on the base and close when it is removed

The bottom of the container has passages for warm air from the heating base. They open automatically when the container is placed on the base and close when it is removed.

- Load the filament into the container and place it on the heating base. The bottom air passages open.
- Select a drying temperature for the material.
- During drying, the spool rotates as warm air circulates and moisture is vented.
- After drying, lift off the container. Close the lid and any unused outlets, then use the container for storage.
Multiple containers can be dried in turn on a single heating base. Removed containers can be stacked for storage. Solo containers also fit on the second row of BIQU VAULT; Duo containers do not fit the VAULT rack.
35–80°C drying, PTC heating and spool rotation

BQDry uses a PTC heater and continuously rotates the spool during drying. BIQU says heating different areas in turn is intended to reduce localized heating, filament softening and sticking. The dryer also vents moisture from the container and uses a damper to adjust the exhaust path.
Temperature is adjustable from 35 to 80°C, with built-in material presets. BIQU lists PLA, PETG, TPU, PA and PC among the supported materials. The front panel displays the selected material, temperature, time and other settings.
| Item | Solo | Duo |
|---|---|---|
| Capacity | 1 spool | 2 spools |
| Overall dimensions (W × D × H) | 135.35 × 255.95 × 325.5 mm | 250.93 × 260.24 × 331.8 mm |
| Temperature range | 35–80°C | 35–80°C |
| Heating and drying | PTC heater and continuous spool rotation | PTC heater and continuous spool rotation |
| VAULT storage | Solo container supported | Not supported |
Dimensions are those shown in the manufacturer’s drawing, including the heating base.
Three outlet directions for feeding the printer during drying

Filament can feed directly to the printer while drying. Three outlet directions allow the PTFE tube to be routed to suit the printer’s position.
The clear container shows the contents and includes a humidity display and label areas for identifying materials and colors.
CryoGrip Omni: A build plate for multiple materials

CryoGrip Omni is a build plate designed for adhesion at lower bed temperatures. It has an orange printing surface, and BIQU lists PLA, PETG, TPU, ABS, ASA, PA6-CF and PC among its supported materials.

Microporous surface layers on a 65Mn spring-steel substrate

The surface has a fine matte texture. A microporous polymer layer is combined with a 65Mn spring-steel substrate through sintered and bonding layers. BIQU calls it the 4.0 cold-print coating and describes it as a structure designed for adhesion without glue.

Bed temperatures by material, and plate versions by printer
Based on its internal testing, BIQU presents room-temperature printing with no bed heating for PLA/PETG, and 30–60°C for TPU/PC/PA6-CF. The table refers to bed temperatures; BIQU says results vary with the filament and operating environment.
| Material | Bed temperature described by BIQU |
|---|---|
| PLA/PETG | Room temperature; bed unheated |
| TPU/PC/PA6-CF | 30–60°C |
There are five plate versions: A1 mini, A1/P1/X1, H2C, H2D/H2S, and Snapmaker U1. Plate shapes and print areas differ by printer.
| Printer listed in BIQU’s specification table | Print area |
|---|---|
| Bambu Lab A1 mini | 180 × 180 mm |
| Bambu Lab A/P/X series | 256 × 256 mm |
| Bambu Lab H2C | 330 × 320 mm |
| Bambu Lab H2D | 350 × 320 mm |
| Snapmaker U1 | 270 × 270 mm |

The AR code at the edge lets cameras on supported printers identify the plate type. BIQU says this is used to apply the appropriate slicer settings. Align the plate with the bed’s locating features when installing it, then select the plate profile for the printer.
Removing prints and cleaning with water

For normal removal, let the print cool and gently flex the plate. For parts with a large contact area, BIQU suggests inserting a spatula under an edge.
For prints that remain firmly attached, BIQU also suggests putting the plate in a refrigerator for about 10 minutes before removal.
Clean with water only; do not use alcohol or other solvents. BIQU also specifies avoiding prolonged soaking and drying the plate promptly after washing.
How it compares with CryoGrip Pro Frostbite and Glacier
CryoGrip Pro comes in the coarse-textured Frostbite and fine-textured Glacier versions. The following compares their materials, bed temperatures and cleaning methods with Omni.
| Item | Omni | Pro Frostbite | Pro Glacier |
|---|---|---|---|
| Surface | Fine matte texture | Coarse texture | Fine texture |
| Bed temperature for PLA | Room temperature; bed unheated | 30–50°C | 45–55°C |
| Bed temperature for PETG | Room temperature; bed unheated | 50–70°C | 55–75°C |
| Other supported materials | TPU, ABS, ASA, PC, PA6-CF and others | ABS (pre-testing recommended for each brand) | ABS, TPU, PVA, nylon-based filaments and others |
| Cleaning | Water only. No alcohol or solvents. | Water and soap. No alcohol or solvents. | Water and soap, or alcohol |
Glacier’s PETG temperatures differ within the official product page: 60–75°C in the description and 55–75°C in the material-settings table. The comparison above uses the table’s values.
Frostbite is an option for PLA and PETG at lower bed temperatures, while Glacier supports options such as TPU and nylon-based filaments. Omni supports multiple materials and, for PLA and PETG, BIQU states that the bed can be left unheated.
Frostbite’s current notes also include ABS. Because behavior varies by brand, BIQU advises printing a 20 mm test cube near the edge of the plate with the bed at 70°C to check whether it prints successfully. For Glacier, BIQU recommends avoiding silk PLA, as strong adhesion can cause damage to the print during removal.
The links below open the Blue, 256 × 256 mm versions for Bambu Lab A1/P1/X1, with Frostbite and Glacier preselected respectively. Other printer sizes can be selected on the product pages.
Official store prices and availability
| Product | Price (USD) | Status when checked |
|---|---|---|
| BIQU VAULT | Main rack: $499 / expansion rack: $399 | Available to order |
| Infinity Bed | $259 | Available to order |
| CryoGrip Omni | $30.99–53.88, depending on printer version | Not available to order |
| BQDry Duo/Solo | Price not listed | Not available to order |
Prices are in USD. Prices and order availability reflect the international BIQU store as checked on November 17, 2026.
Discover more from Psych0h3ad
Subscribe to get the latest posts sent to your email.








Comments