みんなが読みやすいように、Google広告を外しました!

ELEGOO’s Toolchanger Is Here! Centauri X Ultra vs. CC2 and emoji

ELEGOO joins in: Centauri X Ultra 4-head toolchanger
  • Link copied!

Read in other languages

This article contains affiliate links.

ELEGOO has a four-head tool changer too! Meet the Centauri X Ultra.

I asked someone from ELEGOO to take these photos for me at Formnext 2026 in Germany. The white printer has clear filament cases on both sides. I want to see the head changes in action, of course, but the spool storage caught my eye first.

Centauri X Ultra with clear filament cases on both sides
Centauri X Ultra, photographed for me at the show by someone from ELEGOO. Photo: ELEGOO

Four heads, five-second swaps, and up to 20 colors with AFS

According to the display panel, it has four independent printheads and switches heads in 5 seconds. ELEGOO says color changes produce zero purge waste when each head is assigned a single color.

The CC2’s CANVAS system switches the filament fed into a single nozzle. With the Centauri X Ultra, one color per head means swapping the whole head, so there is no need to flush the previous color out of the nozzle at each color change. That becomes especially interesting with models that have lots of small color details. How the CC2 handles multicolor printing: ELEGOO’s official FAQ

ELEGOO also lists multi-material printing that combines rigid and flexible materials in one print. The nozzles reach up to 350°C, with PLA, PETG, TPU, ABS, PA, and PC among the supported materials. There is also a cooling mode for PLA and PETG.

Front view of the Centauri X Ultra printhead
A close look at the printhead. The clear housing stands out. Photo: ELEGOO

The panel also lists up to 20 colors with AFS. The zero-purge-waste claim is specifically for one color per head, so it does not mean zero waste when printing with 20 colors.

I like these filament cases

Front view of the Centauri X Ultra and its two-tier side spool case
Two spools on each side, for four in total. Photo: ELEGOO

My favorite detail is still the filament cases on either side. Each holds two spools, and 65°C filament drying is built in. The top cover and dryer boxes are included as standard.

With other multicolor printers, keeping the filament dry can mean adding more equipment and finding somewhere to put it. I like the way these simple clear cases keep everything alongside the printer. You can see what’s inside, and swapping spools looks straightforward too.

They have already dealt with the question that comes after going multicolor: how do I keep four spools dry? This looks like a simple, accessible way to handle moisture, which appeals to me. We still do not know the printer’s price, but I am glad the cases and drying function are standard equipment.

Clear filament storage case on the right side of the Centauri X Ultra
The clear case lets you check the filament colors and how much is left. Photo: ELEGOO

RFID recognition and automatic filament loading and recovery are also listed. I want to see how well the drying works on an actual machine, but this already looks like a big change from the CC2’s exposed spools.

Specs compared with the CC2 and CC2 emoji

For this multicolor comparison, CC2 refers to the Centauri Carbon 2 Combo, and the emoji edition is the ELEGOO × emoji® Centauri Carbon 2 Combo.

SpecificationCentauri X UltraCC2 (Combo)CC2 emoji
Build volume256 × 256 × 256 mm256 × 256 × 256 mm256 × 256 × 256 mm
Multicolor systemTool changer with 4 independent headsSingle nozzle + CANVASSingle nozzle + CANVAS
Colors4 heads / up to 20 colors with AFS4 colors4 colors
Head changes5 seconds (display-panel claim)Switches filamentSwitches filament
Maximum print speed500 mm/s500 mm/s500 mm/s
Maximum nozzle temperature350°C350°C350°C
Maximum bed temperature120°C110°C110°C
Filament storage and dryingSide cases with 65°C drying, included as standardExposed spools / separate dryer neededExposed spools / separate dryer needed
RFID recognitionSupportedSupportedSupported
Display5-inch flip-up touchscreen5-inch capacitive touchscreen5-inch capacitive touchscreen
Exterior and coverWhite enclosure; top cover includedStandard designemoji exterior, compact thermal cover, custom UI and build plate
U.S. official store priceNot listed on the display panelUS$369US$399

The X Ultra figures come from the display panel at the show; the two CC2 models use ELEGOO’s official specifications. The CC2’s 110°C bed maximum is rated at an ambient temperature of 25°C. Prices are U.S. official store sale prices checked on November 17, 2026. Official CC2 Combo page (U.S.) / Official CC2 emoji page (U.S.)

Build volume, maximum speed, and nozzle temperature match the CC2. The X Ultra raises the bed maximum to 120°C and adds four heads and filament drying. The bigger difference looks likely to be in multicolor and multi-material printing.

The CC2 emoji shares its main printing specifications with the standard CC2 Combo. Along with its custom exterior, UI, and build plate, it has a differently shaped top cover. What’s included with the emoji edition: ELEGOO’s official page

ELEGOO Centauri Carbon 2 Combo
ELEGOO Global Store Centauri Carbon 2 Combo The standard Centauri Carbon 2 Combo with CANVAS four-color printing.

ELEGOO’s U.S. Black Friday sale runs from November 2, 2026, at 3:00 a.m. to December 1, 2026, at 3:00 a.m. EST. View ELEGOO U.S. Black Friday offers

Centauri X Ultra specification panel at the show
The display panel lists four heads, 5-second swaps, 65°C drying, and more. Photo: ELEGOO

The dual-gear direct-drive extruder has a 7:1 gear ratio. Automatic calibration, active vibration compensation, and a quiet mode are also listed. The panel gives the printer’s dimensions, including the filament compartments, as 613 × 462 × 510 mm.

PTFE routing and flexible filament: two things I want to check

One thing that caught my attention is how tight the PTFE tube routing looks near the toolhead. The bends look fairly sharp in the photos. I wonder about feed resistance and the strain on the tubes and fittings as the heads move and swap repeatedly.

Still, I like how it keeps the height down. The routing differs from other tool-changer printers and keeps things compact, so I see a tradeoff with the room available for gentler PTFE bends. I want to see how that holds up over time.

Then there is flexible filament. The display lists TPU support and combinations of rigid and flexible materials, but I also want to know how reliably soft filament feeds through this path. Supported hardnesses, feeding methods, and repeated loading and recovery are all things I would like to check.

There was no price or release date on this display panel.

My CC2 article should be coming soon. Will I get to do a hands-on review of the Centauri X Ultra too?! Stay tuned!

Photos: ELEGOO, taken for me at the show. Centauri X Ultra specifications are those displayed at the exhibition and may change before release. Event information: ELEGOO at Formnext 2026.


Discover more from Psych0h3ad

Subscribe to get the latest posts sent to your email.

ELEGOO joins in: Centauri X Ultra 4-head toolchanger

If you like this article, please
Follow !

Share this article
  • Link copied!
  • Link copied!

Comments

To comment