YuTR0N– Author –
-
Press Release
BIQU unveils VAULT, Infinity Bed, BQDry and CryoGrip Omni at Formnext 2026
BIQU's Formnext 2026 lineup: VAULT filament storage, Infinity Bed, BQDry dryers and CryoGrip Omni, with booth photos and a comparison with Frostbite and Glacier. -
QIDI
QIDI Q3D announced: dual-nozzle printing and pre-orders open
QIDI announces the dual-nozzle Q3D at Formnext 2026, with a 350°C primary hotend, 70°C chamber and prices of US$599 or US$749 with QIDI BOX2. -
New Product News
ELEGOO’s Toolchanger Is Here! Centauri X Ultra vs. CC2 and emoji
A first look at ELEGOO's Centauri X Ultra through photos taken for me at Formnext 2026: four printheads, 5-second swaps, built-in 65°C filament drying, and a comparison with the CC2 Combo and emoji edition. -
On-Site Visit
Lynxel at TCT ASIA 2026: membrane-fed resin printing and the full-colour LC1
I saw Lynxel's prototype running at TCT ASIA 2026. A look at its membrane-fed LMS process, the high-viscosity LB1 and the full-colour LC1, with photos and video. -
New Product News
QIDI MakeBuddy Smart5 Review: A Small but Dependable 3D Printer
After 120+ hours and more than 20 printed parts with no failures, I review the US$349 QIDI Smart5, its QIDI JOY app, Fluidd, and everyday PLA printing. -
PC
OMEN MAX 16: Upgrading the C Drive to 4TB with a Lexar NM990, PTM and TG Putty
Replacing the OMEN MAX 16's 1TB system SSD with a 4TB Lexar NM990, plus a thermal material swap using PTM7950 and TG Putty Advance. -
Snapmaker
Snapmaker U1 Gets the Liber High Flow Hotend, Co-Developed with Phaetus: Up to 87% Higher Volumetric Flow
Snapmaker and Phaetus introduce the Liber High Flow Hotend for U1, with up to 87% higher volumetric flow in manufacturer tests. I saw the prototype at TCT Asia in Shanghai, and mine should be arriving soon. -
Beginner's Guide
From 3MF to 3D Print Renders: Bambu Studio × Blender
Ever wanted a stylish render of your MakerChip? Use Bambu Studio and Blender to turn a 3MF project into a render with visible layer lines, then round the filament paths with my free add-on. Includes 0.2 mm and QIDI 0.4 mm examples. -
On-Site Visit
I Visited Morpho in Shenzhen: Hands-On with Its UV Printer, Inside and Out
I visited Morpho's Shenzhen office to try its desktop UV printer and look inside the hardware and R&D area. Here are my impressions of the prints, thin fins, varnish lenses, touchscreen and maintenance, plus the upcoming price change. -
New Product News
AXILOOP MC8 Kickstarter Is Live: From US$1,099, Specs and MC8 PRO Differences
AXILOOP MC8 is live on Kickstarter: MC8 US$1,099, Pro US$1,499. Super Early Bird prices, estimated Japan shipping, specs, show footage and an upcoming review.
12
